WALLY Feeding Pole Manual
Follow these steps to install your product correctly.
Mark mounting holes
Mark the holes to be drilled using the stainless steel square wall plate. Important: Use a spirit level to ensure the support is mounted straight.
Wall plugs and screws
Insert the wall plugs into the holes and place the stainless steel wall plate against the wall. Drive the screws, including the stainless steel washers, into the wall plugs. Important: Do not tighten them completely.
Install wall bracket
Lower the wall bracket between the stainless steel ring and the stainless steel wall plate
Stainless steel T-bracket
Place the stainless steel T-bracket between the stainless steel ring and the Corten steel wall bracket. If the bracket does not fit, loosen the screws slightly. After positioning, the screws must be tightened firmly.
Attach hanging hook
Mount the suspension hook through the hole at the bottom using two nuts.
Place bird feeder
After the bracket has been mounted to the wall, it is possible to mount the bird feeder in the desired direction. Mount using a bolt and nut connection.
Manual applicable to
Important
Read all instructions carefully before you begin assembly. Do not hang any other products from the hanging hook. The hanging hook is designed for bird food bags. The CORTEN feeding pole is carefully designed for our feeding station pole models. Use only for these products. Do not put weight on the wall bracket. Place the feeding pole in a stable surface.
